Varianta XA64301516 Bench Seat Hinges with Spring for Seat Tops Weighing 8-12 kg (17.6 – 26.4 lbs) - Pair (Left and Right)

The seat pulls forward and up simultaneously, which allows it to be flush with the wall behind without running into it as it opens The portion of the hinge that attaches to the bench top is designed to allow you to remove the top from the bench without having to remove the hinge. If you loosen the screws, you can slide them out of the hinge Hinge design ensures safe retention of seat top in raised position at an angle of 95° Guarantee approximately 110 mm (4-5/16 in) of forward movement Unrestricted opening even of fully upholstered seats, as a joint is not required between the seat and back Hinge joints incorporate a stop to prevent the open seat from slamming against the fitting. Springs for seat tops weighing 8 and 12 kg (17.6 - 26.4 lbs.) counterbalance the weight of the seat top and assist opening. The hinge doesnt come with #8 screws.

• Hinge design ensures safe retention of seat top in raised position at an angle of 95°
• Hinge joints incorporate a stop to prevent the open seat from slamming against the fitting
• Material - Steel with spring. Finish: Blue zinc